Call analysis reads the transcript of each call that comes into a campaign and adds tags to the call to capture what happened: how the call started, compliance events such as a recording disclosure or an opt-out request, caller complaints and suspicious agent conduct, and how the call ended.
Ringba writes each finding to the call as a tag. You can filter and group reports by these tags, read them on the screen where you review the call transcript, and include them in a pixel that fires when the call analysis is complete.
Admin users can enable this feature on a campaign. The tags this feature generates are available to any user who can access the tags for a call. Call analysis is included in all Ringba subscription plans: Business, Professional, and Enterprise.
Call analysis is billed per analyzed call at your account's rate. You can see your call analysis rate by clicking the Subscriptions tile on the Billing Settings screen.
This article contains the following sections:
- How to Enable Call Analysis for a Campaign
- How to View a Call's Analysis
- Using Call Analysis Tags in Reporting and Pixels
- Call Analysis FAQ
Call Analysis
Call analysis looks in a call's transcript for particular features called "signals." It checks for every signal in every call it analyzes. If it detects the signal, it adds a tag to the call. If not, it does not add a tag. You see the results on the call's transcript page and in Reporting. The list of signals and tags appears later in this article.
You turn call analysis on in a campaign's settings:
- If you enable both call analysis and automatic transcription for a campaign, Ringba automatically starts the analysis when transcription is complete.
- If you enable call analysis without automatic transcription, Ringba analyses calls if you request transcription for them individually.
- Call analysis only analyzes calls transcribed after you enable the feature on the campaign.
- It does not analyze calls older than 30 days, even if you request a transcript for them.
When enabled, call analysis begins automatically once transcription is complete. Since it comes after the calls ends, the recording is saved, and the transcription occurs, the analysis might arrive minutes or more after the call ends.
When you disable Call Analysis for a campaign, Ringba skips analyzing any calls that were waiting for analysis.
Call Analysis in Pixels
When you create a pixel to send Ringba data to an outside system, you can choose Analyzed from the Fire Pixel On field to trigger the pixel once the call analysis is complete. You can include any of the tags from the call analysis in the pixel you fire. See Pixels for more information.
Call Analysis Cost
Ringba charges your account balance for each successful analysis, at your account's per-call rate. You can find your per-call rate on the Settings > Billing Settings screen by clicking the Subscriptions tile. Ringba does not charge for a failed analysis.
You can configure a daily cap to limit the number of a campaign's calls to analyze each day. This cap helps you control what the campaign spends on analysis. Without a cap, every transcribed call on the campaign is analyzed.
The cap counts the campaign's analyzed calls. When the campaign reaches it, analysis stops for the rest of the day, and those calls are not automatically analyzed later. The count resets at midnight in your account's time zone. Each campaign has its own cap. When many calls finish at once, a campaign can occasionally go slightly past its cap.
Call Analysis Signals
The following tables list the signals the call analysis tool looks for and the names and values of the tags it adds to the call if it detects those signals.
Outcome
| Tag | Label | Values | Signal |
|---|---|---|---|
Outcome |
Outcome |
success, failure
|
Whether the analysis finished without an error |
SignalDetected |
Signal Detected |
true, false
|
Whether the analysis found any signal on the call |
Call Framing
| Tag | Label | Values | Signal |
|---|---|---|---|
SuspectCallerTransferredIn |
Suspect Caller Transferred In | The caller was transferred in before the call began | |
SuspectMisleadingAdSource |
Suspect Misleading Ad Source | The caller was drawn by a misleading ad | |
SuspectOutbound |
Suspect Outbound | The caller says they were called first |
Compliance
| Tag | Label | Values | Signal |
|---|---|---|---|
OptOutRequested |
Opt-Out Requested | The caller asked to be added to a do-not-call list | |
RecordingDisclosureDetected |
Recording Disclosure Detected | A recording disclosure was given |
Conduct
| Tag | Label | Values | Signal |
|---|---|---|---|
CallerComplained |
Caller Complained | The caller complained of deception or a scam | |
SuspectCallbackFraud |
Suspect Callback Fraud | The agent diverts the caller to a direct number |
Call Outcomes
| Tag | Label | Values | Signal |
|---|---|---|---|
CallOutcome |
Call Outcome | Converted, Follow-Up Set, Transferred, Disqualified, Declined, Dropped, No Pickup, Voicemail, Unavailable, Not Determined | How the call ended |
Note: Call Outcome is NotDetermined when the analysis cannot decide how the call ended.
How to Enable Call Analysis for a Campaign
Call analysis works on transcribed calls, so the campaign's calls need transcripts. See Call Transcription for more information.
Use the following steps to enable call analysis for a campaign:
- Click Campaigns to open the campaign where you want to enable call analysis.
- In General Info, toggle on the Call Analysis switch.
A confirmation window appears to let you know this feature incurs an usage fee. Click Confirm. - If you want to cap how much your account spends per day on call analysis, toggle on the Daily Analysis Cap switch.
The Stop Analysis After Exceeding field appears. - Enter the maximum number of calls to analyze per day for this campaign.
A message appears under the field to show the cost of analyzing the number of calls at the unit rate for your account. - Save the campaign.
How to View a Call's Analysis
A call's analysis appears on its transcription page, between the call details and the recording player.
Use the following steps to view a call's analysis:
- Open Reporting and find the call.
- Click the View Transcription icon in the Transcription column. The transcription page opens in a new tab.
The page shows one of these statuses:
- Call analysis completed. The analysis finished. The detected signals appear grouped under Call Framing, Compliance, Conduct, and Call Outcomes. If the analysis found nothing, the page says No signals detected.
- Failed to analyze call. The analysis did not finish. The transcript is still available, and the call is not charged.
- Call analysis not run. The call has no analysis. Its analysis might still be in progress, call analysis might be off for its campaign, or the campaign might have reached its daily cap.
The page shows only the signals that were detected.
Using Call Analysis Tags in Reporting and Pixels
Analysis tags work like other tags. You can filter and group reports by them, and add them as columns. They appear under the Call Analysis tag type.
Tip: You should not use analysis tags in tag routing filters. Analysis happens after the call ends, so the tags never exist while a call is being routed. A filter that requires one blocks every call to that target.
Call Analysis FAQ
Do I need automatic transcription to use call analysis?
No. Call analysis analyzes every transcribed call on the campaign, whether it was transcribed automatically or individually. A call without a transcript is not analyzed.
Can I choose which signals to analyze?
No. Call analysis checks each call for every signal.
Can I re-analyze a call?
No. There is no benefit to repeating the analysis, since the result would be the same each time.
Why does a call say "Call analysis not run"?
There are several reason why a call might not have an analysis yet:
- Its analysis might still be in progress. In this case, wait a few minute and check again.
- Call analysis might not be enabled for the campaign. In this case, you can enable call analysis for the campaign and initiate a transcript, as long as the call was not already transcribed and is not older than 30 days.
- The campaign might have reached its daily cap.
- The call may be older than 30 days. These calls are not eligible for call analysis.
What should I do if I need help?
If you have any questions or need additional help, please reach out to our support team via chat or email at support@ringba.com.